MapleSim
analyze MapleSim models in a Maple standard worksheet
Description
Commands
Use the application programming interface (API) to interact with your MapleSim model. The MapleSim API is a collection of procedures for manipulating, simulating, and analyzing a MapleSim model in a Maple standard worksheet.
There are two ways to link to a MapleSim model; linking to a MapleSim model using LinkModel or through the embedded component facility. See the examples section in the LinkModel description.
The Tools subpackage contains commands used to generate Modelica models from within Maple.
The Analysis subpackage contains commands to analyze your models by varying their parameters.
CreateModel : create a MapleSim model from a Modelica file
You must first link to a MapleSim model using the following command before using the MapleSim API commands:
LinkModel: link to a MapleSim Model
The following MapleSim API commands are available:
ApplySubstitutions: apply variable and parameter substitutions
DeleteAttachment: delete the attachment of the linked MapleSim model
GetAttachment: get the Attachment of Linked MapleSim Model
GetCompiledProc: compile the Subsystem of the Linked MapleSim Model into a C Function
GetEquations: get the equations of the active subsystem
GetICs: get the initial conditions of the active subsystem
GetModel: get a linked MapleSim model filename
GetModelica: get the Modelica description of the active subsystem
GetMultibody: get a module containing the multibody portion of the active MapleSim subsystem
GetParameters: get the parameters of the active subsystem
GetPorts: get the signal ports of the active subsystem
GetSettings: get the settings of Linked MapleSim model
GetSubstitutions: get the variable and parameter substitutions defined for the model
GetSubsystemName: get the active subsystem name
GetVariables: get the variables defined for the active subsystem
ListAttachments: list the Attachments of the Linked MapleSim Model
ListSubsystems: list the subsystems defined in a linked model
SetAttachment: set the Attachment to the Linked MapleSim Model
SetComponent: create a component from Modelica source
SetModel: set a linked MapleSim model
SetParameters: set the parameters of the active subsystem
SetSubstitutions: store a set of variable and parameter substitutions with the model
SetSubsystemName: set the active subsystem name
ShowResultsManager: show the Results Manager
Simulate: simulate the Linked MapleSim Model
Tools: subpackage of commands used to generate Modelica models from within Maple
The following MapleSim Multibody API commands are deprecated:
MapleSim[Multibody][BuildEQs(deprecated)]: generate the governing equations of a multibody system
MapleSim[Multibody][GetMultibodyInput(deprecated)]: generate a description for the multibody portion of a MapleSim model
For more information on the kinematic and dynamic exports of a multibody system, see the dynamic exports and kinematic exports help pages.
See Also
MapleSim Model Component
Download Help Document